About Genie HT

Genie ® HT was developed specifically for high-throughput environments offering diagnostic testing based on isothermal amplification methods. As with the smaller Genie ® instruments, the Genie ® HT can be fully controlled from its embedded touchscreen and also uses the custom 8-microtube Genie ® Strip. This system was designed to be modular and can be procured with any number of sample blocks installed up to a maximum of 12. Instruments delivered with less than 12 blocks may be upgraded at any time. The Genie ® HT offers full random access with any blocks used at any time.

  • Processes up to 12 strips-of-8 tubes simultaneously
  • Maximum 96 samples in a single run
  • User-selectable number of processing blocks installed
  • Reduce initial investment if working to a budget
  • Additional blocks may be added at any time
  • Complete random access – use any block at any time
  • Stand-alone operation not requiring a computer
  • Controlled from 10.1” high-resolution touchscreen
  • Wired connections to network and USB
  • Wireless WiFi and Bluetooth interfaces
  • Dual-colour fluorescence detection
  • Open platform supporting all isothermal methods


Technical Specifications
Detection methodDual-channel Fluorescence
470 nm excitation, 510-560 nm emission
590 nm excitation, > 620 nm emission
Temperature control methodBlock with 4-zone independent digital PID and heated lid
Temperature control range and accuracyAmbient—100°C, ±0.1°C
Sample number12 x strip of 8 tubes
Sample volume10—150 µl
Size635mm (L) X 434mm (W) X 153mm (H)
Weight18kg / 40lbs
Operating temperature0°C—40°C
Storage temperature20°C—70°C
Environmental protectionIP20
Display / keyboard10.1” High-brightness LCD with multi-touch projective capacitive touch panel (1280 x 800)
Wireless data (1)Bluetooth 2.0
Wireless data (2)Wi-Fi
Wired data1 x USB ‘B’
2 x USB ‘A’
1 x Power in
1 x RJ45 – Network connection
1 x USB ‘A’ – diagnostic port
Power supplyInput: 100-240V AC

    Register Genie Instrument

    Newsletter Signup
    Be The first to hear the latest news from Optigene


      Free Sample Request Form

      One sample per organisation - new customers only.
      Isothermal Master Mix samples will be sent as dried reagents only. These require re-suspension before use. Dried reagents perform near identically to the wet reagents but do not require cold shipment or storage.
      Both wet and dry reagents are available for purchase from OptiGene.

      Please only press 'Submit' once.
      You will receive a sample as soon as possible.